Fork density meter
· Measure density ,concentration ,gravity, temperature of liquid
· The accuracy will not be affected by temperature, pressure,density, viscosity, etc.
· Accuracy: ±0.002g/cc; ±0.001g/cc optional
· Applications:pipeline interface detection ,mineral slurry solids monitoring,and corrosive acid concentration control;Where fast-response density and concentration monitoring is required.
· Increase installation flexibility with continuous, real-time measurement in pipelines, by pass loops and tanks
· Choose from a wide range of corrosion-resistant materials for measuring density and concentration of critical chemicals Support protocols for connection to DCS, PLC and flow computers
· Expand usage with a hazardous area-approved, head-mounted transmitter that supports local configuration and display
Fork density meter can measure the density, concentration, gravity, temperature, and accuracy of liquids without being affected by temperature, pressure, density, and viscosity. Applications: Pipeline interface inspection, slurry solids monitoring and corrosive acid concentration control; density and concentration monitoring that require rapid response. Continuously measure pipelines in real-time through pipelines and storage tanks to increase installation flexibility and choose from a variety of corrosion-resistant materials to measure the density and concentration of key chemicals. Supports protocols connected to DCS, PLC and flow computers. Pass Hazardous Area Approved Head-Mounted Transmitters extend the range of use, the transmitter supports local configuration and display.
Video Display
Product introduction
Touch screen transmitter: We have our own patented touch screen transmitters with DSP core processor with faster data processing speed.
light sensing: Traditional light sensing transmitters. This is the technology for us for the last generation. They have a disadvantage that they will be dis-functional under the strong light in the outdoors.
OEM Nameplate: We support OEM lables. We can customize everything on lables for you, even for the inner software.
Waterproof hole: Waterproof & Explosion- proof threading hole.
With explosion proof rate of ExdibIICT6Gb.
CONNECTIONS: Connections can be specially customized based on your own requirements. GB Flange/ ANSI/ DIN/ JIS Flanges / threaded connections/ Tri-clamp connections, etc.
CONNECTIONS: Connections can be specially customized based on your own requirements. GB Flange/ ANSI/ DIN/ JIS Flanges / threaded connections/ Tri-clamp connections, etc.
CONNECTIONS: Connections can be specially customized based on your own requirements. GB Flange/ ANSI/ DIN/ JIS Flanges / threaded connections/ Tri-clamp connections, etc.
Insertion type/ Pipeline type: The flow velocity should be below 1.5m/s. If the flow velocity is too fast, or the pipe diameter is too small, it is recommended to expand the pipeline to at least DN 150.
Insertion type/ Pipeline type: The flow velocity should be below 1.5m/s. If the flow velocity is too fast, or the pipe diameter is too small, it is recommended to expand the pipeline to at least DN 150.
Output: 4-20mA, 0-1KHz, standard ModBus 485 communication, and HART communication
Material: Standard 316L stainless steel, can be customized according to customer requirements, including Ha C alloy, 2205 steel, tantalum and so on.
Custom length: The length of the density meter insert is standard 128mm, and the insert length can be customized according to customer requirements.
Choose your own customized coriolis flowmeters
| 1 | Code | Probe material | |
| A | 316L stainless steel | ||
| B | Hastelloy | ||
| C | 316L stainless steel lined PTFE | ||
| D | Hastelloy lined PTFE | ||
| 2 | Code | Transmitter output | |
| E | 4-20mA 0-1000Hz RS485 Modbus RTU | ||
| 3 | Code | power supply | |
| A | 24VDC | ||
| B | 220VAC | ||
| 4 | Code | Transmitter housing | |
| F | Aluminum alloy | ||
| 5 | Code | Pressure Level | |
| 16 | 1.6MPa | ||
| 40 | 4MPa | ||
| XXX | Special: Use this letter to apply for special | ||
| 6 | Code | Process connection | |
| A | DN50 HG/T 20592- -2009 RF | ||
| B | Chuck | ||
| XXX | Special custom | ||
| 7 | Code | Pole length | |
| 128 | Standard length 128mm | ||
| XXX | Special: Mark the required length | ||
| 8 | Code | Extension rod material | |
| A | No extension | ||
| B | 316L stainless steel | ||
| C | Hastelloy | ||
| D | 316L lined with PTFE | ||
| E | Hastelloy lined PTFE | ||
| 9 | Code | Flange material | |
| A | 316L stainless steel | ||
| B | Hastelloy | ||
| C | 316L lined with PTFE | ||
| D | Hastelloy lined PTFE | ||
| 10 | Code | Installation method | |
| A(XX) | Horizontal pipe (XX: user pipe diameter) | ||
| B(XX) | Vertical pipe (XX: user diameter) | ||
| C | Tank installation | ||
| D | Special: Use this letter to apply for special | ||
| 11 | Code | Factory setting | |
| G | Factory setting options | ||
Downloads
Typical Applications
Specifications
(1)Density accuracy: standard ±2,0 kg/m3(±0,002 g/cm3), ±1,0 kg/m3(±0,001 g/cm3) optional
(2)Operating density range: 500-2500 kg/m3 (0.5-2.5 g/cm3)
(3)Operating temperature range -short stem: –50 °C a +200 °C (–58 °F a +392 °F)
(4)Operating temperature range- long stem: –40 °C a +150 °C (–40 °F a +302 °F)
Materials
Wetted parts- short-stem meter ( standard length of 128mm) :
- 316L stainless steel
- Alloy C276
- 316L stainless steel with PFA coated
- Alloy C276 with PFA coated
Wetted parts- long-stem meter
- Alloy C276 for meters up to 2 m (6.5 ft) long
- 316L stainless steel for meters up to 2 m (6.5 ft) long Tine finish
- Hose connection up to 10m (32.8 ft)
Display functions
- View process variables.
- Touch screen transmitters.
- Supports multiple languages ( English and Chinese)
Transmitter output channels
- Current output, 4- 20 mA
- Frequency output, 0- 1KHz
- Modbus/RS-485 output
- HART optional
Meter approvals, calibrations, and certifications Agencies & types of approval available
- CE
- ATEX
- ISO 19001
- ISO 14001
- OHSAS 18001
ADD：No. 8 building, 3rd. district,I-Town, Gaoli Zhang road，Haidian District, Beijing, China 100095
Mobile：13601110505 010-62469048，62468399，62469399
FAX：010-62469048
Email：vip@bjsincerity.com
PRODUCT
> Coriolis mass flow meter
> Thermal mass flow meter
> Fork Density meter
> Others
> Contact
MESSAGE